Mitsubishi Model AH270

NAM Programming Guide

By: Mikelo2k

Step 1. Press the Power (PWR) button for at least 2 seconds to start the phone.

Step 2. After the screen clears hold the END key down and enter 6 9 7 2 8 1 4.

Step 3. Follow instruction table below:

The TALK key stores the new info/goes to next step.

The END key saves the changes and goes back to the mainscreen.

The CLR key lets you correct any mistakes.

Step #	Digit # Range	Screen Display	Description
1	10 numbers	no	Your Area Code & Phone Number (xxx)xxx-xxxx
2	00000 - 32767	S id	The System ID number
3	0000-9999	SEcCode	The Security Code
4	0 or 1	LOCAL	Local Use Mark
5	0 or 1	E	I think END TO END Dialing
6	0333 or 0334	IPCH	Initial paging channel
7	2 Digits	ACCOLC	Access Overload
8	0-15	GIM	The Group ID
9	0 or 1	RI	Roam Inhibit
10	5 Digits	LOC 01	I have no idea
11	5 Digits	LOC 02	If you keep entering data it keeps asking for code 02, 03 etc..
12	5 Digits	PrEF 01	Your preference option #1, #2, etc...
13	0 or 1	Auth InPUt	Some Kind of Authotization
14	Any	EMG no	Your emergency number
15	Return To Start	Step 1	Go back again

Locking and Un-Locking

Remember the code the you entered in step 3? Well you’re gonna need it. Press FCN and 8, then press 1, then enter the security code. You should get this message (close to this) “rEStr norEStr”, then press STO or END. Next you must Press FCN and 8, then 2 and enter your Security code, then it will say UnLoc and will let you type in any 3 digit Lock Code, and press STO.

To Lock the phone press FCN and 5, enter your new/old Lock Code and it will say Loc’d. If not then you either did something wrong, or the code is wrong. And to unlock the phone, just re-type the code and it will return to the main screen.

Hope you have phun with this file, try not to use this for illegal use *wink, wink*. If anyone could help/tell me what Step 10 LOC is used for, or just need help/have comments, email me at michael264@home.com

This is my first hack related phile ever made by me, hope you like it.