CT-104 Cellular Mobile Telephone
(170-1076/1077/1078/1020/1006)   NAM Programming


Dual-NAM Programming Instructions

STEP 1 (Enter Program Mode):

Type:   *3001#12345 [SEL] 9    Phone Responds:  InStALL
Type:   [END]                  Phone Responds:  IdEnt IF InFO Pri
Type:   [END]  (see Note 1)   

Note 1: If you wish to program the phone for a 2nd cellular phone number,
        press <SND> BEFORE pressing [END]. At this point the phone will 
        display "OPt InFO dISAbLEd". Now type: [SND] and then [END]. 
        You may now continue with Step 2 as normal.

STEP 2 (Programming the Primary NAM information):

The phone will now inform you of the parameter it wants you to enter on
the top line with the previously programmed parameter (or factory default)
on second line.  The starred (*) lines require information that MUST be
supplied by the cellular carrier.

*Line 1 of Phone: HO- Id     Type:  5-digit Home System ID then [END]
 Line 1 of Phone: ACCESS     Type:  [SND] IF line 2 displays: 0 then [END]
 Line 1 of Phone: LOCL OPt   Type:  [SND] IF line 2 displays: 0 then [END]
*Line 1 of Phone: Phon       Type:  10-digit phone number then [END]
 Line 1 of Phone: ST CLASS   Type:  0 8 then [END]
*Line 1 of Phone: PAging Ch  Type:  4-digit Paging Channel then [END]
                                    (Note: Channel A is: 0333,
                                           Channel B is: 0334)

Line 1 of Phone: O-LOAd CLASS Type: 0 and last digit of phone # then [END]
Line 1 of Phone: PrEF SYS     Type: [SND] to toggle between "A" and "B",
                                    then [END] 
                                    (Note: A if PAging Ch is 0333,
                                           B if PAging Ch is 0334)

*Line 1 of Phone: grOUP Id     Type:  2-digit Group ID then [END]
 Line 1 of Phone: SECUrIty     Type:  5-digit Security Code then [END]
 Line 1 of Phone: 1 dAtE       Type:  [END] (Do NOT change this)
 Line 1 of Phone: 2 dAtE       Type:  (todays) 6-digit date (in the form:
                                      mmddyy), then [END]
 Phone: Prog donE    Type:  [POWER]    

 The phone should now be correctly programmed. It is important to remember
 that it will take a cellular carrier several hours to activate a cellular
 phone number. 

Settings List:                                   Accessories:

[SEL] 1     Display Carrier Priority          17-504  PC/FAX Interface
[SEL] 11    Change Carrier Priority (A/B)     17-705  Wiring Harness
[SEL] 2     Enable/Disable Horn Alert                   (CT-102/103/104)
[SEL] 3     Display Time of Last Call         17-704  Horn Alert
[SEL] 33    Display Call Timer Total                    (CT-102/103/104)
[SEL] 44    Enable/Disable Key Entry Tone     17-706  Handset Extension
[SEL] 5     Clear Call Timers                           (CT-102/103/104)
[SEL] 6     Change Auto-Shutoff Time          17-610  Battery Charger
[SEL] 7     Change Primary/Secondary NAM                (CT-1033)
[SEL] 88    High/Low Power                    23-187  Rechargeable Battery
                                                      T16-DV124 4500 mAh 
                                                        Battery  (CT-1033)
                                                      T16-DV127 7000 mAh 

Switching NAMs

Selecting NAM 2

1.  Press [SEL] 7.

2.  Press [7] to change phone number.

3.  Press [SEL] to accept new setting.