CT-350/1/3-Technophone
(170-1060/1/3) (170-1066) NAM Programming
STEP 1, ENTER PROGRAM MODE:
Type: *3001#12345<STO>00 Phone Responds: STORE NOT DONE
STEP 2, PROGRAM CELLULAR PHONE NUMBER:
Press: <RCL> 0 2 Phone Responds: (previous phone #)
Press and HOLD: <CLR> until display is empty
Type: Power Up Name, Phone #, and <STO> 02
Phone Responds: REPLACE CONTENTS?
For example: MYPHONE 8173905555 <STO> 02
Press: <STO> Phone Responds: STORED
Note: The "Power Up Name" is optional. To enter a Power Up Name, Enter
Alpha Mode by pressing the <ABC> key, the ALPHA indicator appears.
Press the # key that has the character on it you want repeatedly
until the correct character appears. To enter an "L" for example,
you would hit the "5" key 3 times. When done entering the characters
press "ABC" key again.
STEP 3, ENTER CARRIER PARAMETERS:
Type: <RCL> 0 3 Phone Responds: (previous
parameters)
Press and HOLD: <CLR> until display is empty
Type: cellular phone parameters and <STO> 03 (on the CT-352, add the Long
Distance and International Code).
For the CT-350/1/3 and Technophone : 00038*1*1*334*05*10 <STO> 03
| | | |
Home or System -------+ 333 for A | +----Group ID
334 for B |
Channel |
+--0 and Last
Digit of Phone #
For the CT-352: 00038*1*1*334*05*10#0111*1 <STO> 03
| | | | |
Home/System ----+ 333 for A | | +-------Internat Code
ID 334 for B | +-----Group ID
Channel |
+--0 and Last
Digit of Phone #
Phone Responds: REPLACE CONTENTS? Press: <STO>
STEP 4, ENTER LOCK/SECURITY CODE PARAMETERS:
Type: <RCL>01 Phone May Respond: 911#*911#0*1234
Press and HOLD: <CLR> until display is empty
Type: 911#*911#0*
Type (for the CT-350/353): 4 digit lock code (1234 is the default)
Type (for the Technophone): 4 digit lock code (1234 is the default)
Type (for the CT-351/352): 5 digit security code (12345 is the default)
Note: The 0 in this section denotes "ENGLISH" language selection. Replace
with a "1" for Spanish, a "2" for French.
Type: <STO>01 Phone Responds: REPLACE CONTENTS? Press: <STO>
You are DONE. The phone must be turned off and then on again before it
will recognize the new parameters. Always wait at least two hours after
receiving the cellular phone number from the carrier before testing the
phone.
MENU LIST (on CT-352 press <STO> after menu #):
<MENU> 0 Lock Phone <MENU> 5 Enable/Disable Key Tone
<MENU> 1 Change Carrier Priority <MENU> 6 Ring Volume
<MENU> 2 Display Last # Dialed <MENU> 7 Primary/Secondary NAM
select
<MENU> 3 Call Timers <MENU> 8 Send DTMF Tones
<MENU> 4 Turn ON/OFF Display Light
CT-351/352 changing lock code: <MENU> 1 1 then Security Code then New
Lock Code then <STO>.
Note: There is now a data interface for the CT-352 (17-1062), this CMC
item will ONLY work with two PCMCIA modems. Fax machines and
standard modems are NOT supported. No other data interface is
available for ANY of these phones.
(04/11/96)