CT-352/355 Mini Handheld Flip-Style Cellular Phone 
(170-1062/1168)   Dual-NAM Programming Instructions

STEP 1 to Enter Program Mode:

Type:   *3001#12345<STO>00    Phone Responds:  STORE NOT DONE

STEP 2 to Program the User's Phone Number:

Press: <RCL> 0 2  Phone Responds:  1111111111 (or previously programmed #)

Press and HOLD:  <CLR> until display is empty

Type: cellular phone number and <STO> 02  Phone Responds: REPLACE 
CONTENTS?

For example:   8173905555 <STO> 02

Press:  <STO>      Phone Responds:   STORED

STEP 3 to Enter Carrier Parameters:

Type:  <RCL> 0 3   Phone Responds:  38*1*1*334*15*15 (or previously 
                                    programmed parameters)

Press and HOLD:  <CLR> until display is empty

Type: cellular phone parameters and <STO> 03, on the CT-352,
      add the Long Distance and International Code.

For the CT-350/351: 00038*1*1*334*05*10 <STO> 03
                      |        |   |  |
Home or System _______|  333 for A |  |___Group ID
                         334 for B |
                         Channel   |
                                   |__0 and Last Digit of Phone #

For the CT-352/355:  00038*1*1*334*05*10#0111*1 <STO> 03
                       |        |   |  |    |  
    Home or System ____|  333 for A |  |    |_______Internat Code
                          334 for B |  |____Group ID
                          Channel   |
                                    |__0 and Last Digit of Phone #

Phone Responds:   REPLACE CONTENTS?              Press:  <STO>

STEP 4 to Enter Lock/Security Code Parameters

Type:  <RCL>01              Phone May Respond:  911#*911#0*1234

Press and HOLD:  <CLR> until display is empty

Type:  911#*911#0*

Type (for the CT-350):      4 digit lock code       (1234 is the default)

Type (for the CT-351/352):  5 digit security code   (12345 is the default)

Note: The 0 in this section denotes "ENGLISH" language selection. Replace 
      with a "1" for Spanish, a "2" for French.

Type:  <STO>01      Phone Responds:  REPLACE CONTENTS?     Press:  <STO>

You are DONE.  The phone must be turned off and then on again before it
will recognize the new parameters.  Always wait at least two hours after
receiving the cellular phone number from the carrier before testing the
phone.

Settings List:

<MENU> 0    Lock Phone
<MENU> 1    Change Carrier Priority (A/B)
<MENU> 2    Display Last # Dialed
<MENU> 3    Call Timers
<MENU> 4    Turn ON/OFF Display Light
<MENU> 5    Enable/Disable Key Tone
<MENU> 6    Ring Volume
<MENU> 7    Primary/Secondary NAM select
<MENU> 8    Send DTMF Tones

(6/10/99)