Siemens S3 Programming

FOR AUTHORIZED DEALER USE ONLY - Not for use in Pennsylvania


Manufacturer: Siemens Private Comunication Systems Group
Model: Siemens S3 com (also look S4 and Sony CM DX 1000)
Type:
Batery Type: 6v 550 mAh NiMh Cadmium free battery
Made in: GERMANY
Compatibility: With S4 and Sony CM DX 1000 models

FEATURES

Length: 157 mm
Width: 58 mm
Thickness: 22 mm
Volume: 180 cc
Weight: 260 g
Standby time: 20 hours
Talk time: 100 minutes
Charging time: 1 hour
Power Rating: GSM Class 4 (2 watt)
LCD graphic display: high-resolution, 97x33 pixels, 4 lines, 16 characters per line
Card: Full size SIM card
Antenna : Helix 157 mm
Test Mode: Yes
IMEI: You can look it only with the Keyboard.

TEST MODE OR MONITOR

The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.

ACTIVATE MONITOR MODE:

  1. Turn the phone on.
  2. Enter the PIN access code on press OK. (Only if is enabled).
  3. Press Menu. (Left top button).
  4. Press 9. (Phone Options).
  5. Press 8. (Phone Status) (May be button 7 in some phones).
    You may see your IMEI Number
  6. Left Display Button (Top left MENU key).
  7. 7684666
  8. HangUp Button. (Red HandSet key).

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Monitor Mode 01
Indicator Explanation Values
CH Channel Number xxx
RX Signal Strength (dB). dB
N NCC (Color Code) 1-7
B BCC (Color Code) 1-7
CI Cell ID (in Hex) xxxx
C1+ how long before phone does forced hand over. (C1+ = RXAM - RX) xx
LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC xxXXxx xxxx
TXPWR Transmit Power (dB) dB
RXAM Receive signal strength cut-off point 102
Monitor Mode 01 (call in progress)
Indicator Explanation Values
TS Time Slot Number
TA Timing Advance. Distance from tower in Km X 2
PL Power Level PL
RX Signal Strength (dB). dB
N NCC (Color Code) 1-7
B BCC (Color Code) 1-7
CI Cell ID (in Hex) xxxx
LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC xxXXxx xxxx
LF C1 value with continuous transmisson from tower 51
LS C1 Value with discontinuous tranmission from tower 52
QF Bit Error Rate with continuous transmission from tower BER
QS Bit Error Rate with discontinuous transmission from tower BER
Monitor Mode 02 list of strongest signals
Indicator Explanation Values
List Number 1-6
CH Channel Number xxx
RL Signal Strength (dB). dB
RM Receive signal strength cut-off point(-100) 02
TX Transmit Power (dB) dB
N NCC (Color Code) 1-7
B BCC (Color Code) 1-7

Power Table PL/dBs/Watts

PL: 5 6 7 8 9 10 11 12 13 14 15
dB: 33 31 29 27 25 23 21 19 17 15 13
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02

BER Bit Error Rate table

QF/QS register: 0 1 2 3 4 5 6 7
% of bit sent: 0.2 0.4 0.8 1.6 3.2 6.4 12.8 25.6